1. Destination, use and gear
Creasing machine „ 504 S” has crank gear, it is equipped in overloaded element which allow to make failure-free realization creasing lines of length 500 mm in one stroke number time on cardboards of thickness 0,1÷ 0,6 mm.
2. Standard equipment
– tool for creasing (to: 1 ÷ 4 creasing lines /work cycle) – 1 piece
– completed slats – 1 set
– distance slats – 2 pieces
The creasing machine can be equipped additionally in:
3. Additional equipment
● tool for creasing (only one line),
● tool for line (dashed) perforation (without holes),
● Tool for fixing slats on posters and calendars
● Tool for creasing thick cardboard (one creasing line) with thickness to 2,5 mm and for length 410 mm (for: segregators, photo album etc.)
4. Specification
The way of feeding the material – handy
The way of starting the machine – by foot
the amount of creasing lines (its changeable) – 1; 2; 3 or 4 pieces
length of creasing line (for cardboards) – 500 mm
constancy distance between 1 and 2 as well as 3 and 4 creasing line – 6,7 mm
changeable distance between 2 and 3 creasing line – 530 mm
max thickness of creasing cardboard – 0,6 mm
length of line perforation – 500 mm
length of cut perforation – 2,84 mm
distance between cut perforations – 0,71 mm
thickness of perforating – 0,2 mm
maximum length of slats for posters – 500 mm
max length of creasing line for thick cartons (up to 2.5 mm) – 410 mm
max thickness of creasing for „thick cartons” – 2,5 mm
bumper – two-level of limiter
max distance between 1 and 2- step of bumper – 60 mm
maximum bumper distance to creasing line – 370 mm (on 2- step of bumper)
time of machine cycle – 0,65 s
regulation of strength’s pressure – as in Manual Operation
5. Electric parameters
drive / the power consumption – motor/0,37 kW
electric supply – 230 V
frequency of net – 50 Hz
6. The level of acoustic pressure – < 70 dB(A)
7. Weight – 93 kg
8. Dimensions: width × length× height – 650 × 650 × 910 [mm]
